实力商家 | 源头厂家
全国服务电话：
0755-89885991
7X24小时电话 周一至周六 9:00-18:00
0755-89885991
手机：15989465891
电话：0755-89885991
传真：0755-89885991
地址：深圳市龙岗区平湖镇华南城化工区M17栋121号
通用润滑脂General purpose grease
通用润滑脂采用深度精制基础油，以羟基脂肪酸锂皂稠化，并加抗氧、粘度指数改进剂等***添加剂，接触器制脂新工艺精制而成。组织结构平滑，纤维细腻。
通用润滑脂
性能概述:
通用润滑脂采用深度精制基础油，以羟基脂肪酸锂皂稠化，并加抗氧、粘度指数改进剂等***添加剂，接触器制脂新工艺精制而成。组织结构平滑，纤维细腻。
主要优点:
（1）优异的降噪性能和粘附性能：高粘度基础油搭配多种增粘剂组合，保证了产品即使在高速条件下也不会甩脱流失。
（2）优良的泵送性：在集中供脂部位具有显著优势。
主要用途:
本产品为多用途之润滑剂，用于一般工厂，适用于对润滑脂粘附性及泵送性要求较高的轴承、齿轮、滑轨,、关节等部位。HZ000/00/0/1 适用于水泥搅拌站集中供脂系统、泵车集中供脂系统等集中供脂系统。HZ2/3适用于挖掘机、推土机手臂关节插销等关节连接部位。连续运行时的适用温度范围为-20~120 ℃，短时间***使用温度为150℃。
注意事项:
（1）使用本产品时，必须把润滑部位清洗干净，避免污染。
（2）不可与不同牌号，不同品种的润滑脂混合使用。
（3）不得与废旧润滑脂混合使用。
典型特性:
项目 | 000# | 00# | 0# | 1# | 2# | 3# | 试验方法 |
外观 | 黄色均匀油膏 | 目测 | |||||
锥入度/0.1mm | 450 | 410 | 370 | 320 | 275 | 230 | GB/T 269 |
滴点/℃ | 160 | 180 | GB/T 3498 | ||||
腐蚀（45#钢，100℃，3h） | 合格 | SH/T 0331 | |||||
钢网分油（100℃，24h）/% | - | - | - | 2.5 | 2 | 1.5 | SH/T 0324 |
General purpose grease
Performance overview:
Anmei General Lithium Grease HZ series adopts highly refined base oil, thickened with hydroxy fatty acid lithium soap, and added with high-efficiency additives such as antioxidants and viscosity index improvers, and is refined with a new contactor grease making process. The structure is smooth and the fiber is fine.
main advantage:
(1) Excellent noise reduction performance and adhesion performance: high-viscosity base oil with a variety of tackifier combinations to ensure that the product will not slip off even under high-speed conditions.
(2) Excellent pumpability: It has a significant advantage in the centralized grease supply part.
The main purpose:
This product is a multi-purpose lubricant, used in general factories, suitable for bearings, gears, slides, joints and other parts that require high grease adhesion and pumpability. HZ000/00/0/1 is suitable for centralized grease supply systems such as cement mixing station centralized grease supply system, pump truck centralized grease supply system, etc. HZ2/3 is suitable for joint connection parts of excavator and bulldozer arm joint pins. The applicable temperature range during continuous operation is -20~120 ℃, and the maximum operating temperature for a short time is 150 ℃.
Precautions:
(1) When using this product, the lubrication parts must be cleaned to avoid contamination.
(2) It cannot be mixed with different grades and different types of grease.
(3) Do not mix with waste grease.
复制产品链接
长按图片保存/分享
询盘
询盘
7X24小时电话 周一至周六 9:00-18:00
0755-89885991
联 系 方 式
电话：0755-89885991 手机：15989465891
地址：广东省深圳市平湖镇华南城化工区M17栋123号
分 享 关 注
点击右上角
分享给朋友吧
©2026 深圳市吉圣雅科技有限公司版权所有 备案号： 网站地图
